A new 390T decal would make a job of the near one!View attachment 73510got them both out
80 vs 90 iirc, 390 has 248 engineWhat's the hp of a 390T vs a standard 390?.
Smashing looking beauties there KV :Thumbp2:
What's the hp of a 390T vs a standard 390?.
Smashing looking beauties there KV :Thumbp2:
80 vs 90 iirc, 390 has 248 engine
Ha, it was wasted on me as I wasn’t there!Cfm kuhn open evening .they moved it to east cork hoping that it would tempt @CORK to buy a plough
We put 10 ton in yesterday. We had near killing the 6270 but she handled it:Thumbp2::Thumbp2::Thumbp2::oops2:.its a demo machine our one has given a bit of trouble recently
We put 10 ton in yesterday. We had near killing the 6270 but she handled it:Thumbp2::Thumbp2::Thumbp2::oops2:.its a demo machine our one has given a bit of trouble recently
Be 13-14 Ton for in the Siloking! Full to the limit thoWe got afraid
yes. its a balls thoIs the black piece on top the Balehandler?
Would a twin auger be alot easier restart than the keenan?We put 10 ton in yesterday. We had near killing the 6270 but she handled it:Thumbp2::Thumbp2::Thumbp2::oops2:.its a demo machine our one has given a bit of trouble recently
Would a twin auger be alot easier restart than the keenan?
yes. its a balls tho
If I had my time and money over again, I would never have bought a feeder. Pity I didnt spend the equilivent on a loading shovel and cut out the messing. Feeder is too slow and burns too much diesel if ingredients are close to feed out. Couple of tumbles in the bucket and mix is good enought for me