What type of loader head is this

[Tomjim]

What kind of brackets will I need to put on a bucket to fit this head. Would I need to get euro brackets?

The head is on a tanco loader

 

[nashmach]

You'll need to do some measuring to confirm but that looks like a Tanco headstock to me as in their own brackets.

 

[jf 850]

What kind of brackets will I need to put on a bucket to fit this head. Would I need to get euro brackets?

The head is on a tanco loader View attachment 75606 View attachment 75607 View attachment 75608

It's either a Tanco or a Rossmore .
But if it's a Tanco loader , I'd say its Tanco brackets you need . The little handle for shutting across the locking pins is the same as a Tanco 978 I have here

 

[bk1991]

https://multec.co.uk/shop/brackets-weld-on/tanco-loader-brackets/

Id say the same that its tanco

 

[JohnBoy]

have you many attachments already?

I'd be tempted to suggest you consider ditching it and going for a euro headstock. would open up the biggest range of attachments to you and if you upgrade your tractor or loader in the future it will most likely have a euro hitch on it.

They've gotten quite cheap over the years.

 

[Tomjim]

I have 3 attachments
They have mx brackets at moment
Will buy tanco brackets

 

[lough]

I have 3 attachments
They have mx brackets at moment
Will buy tanco brackets

I have an MX loader head that I would sell if you were interested

 

[jf 850]

Here is Tanco 978 head.

And hooks to suit it . 1st type slightly thicker heavy duty type , made by a lad from Limerick who used to be on donedeal . I wouldn't bother with them again , as harder to pick up, due to little room for error.
Other type was on a grab that came with the loader . Simple , cheap and does the job.

 

[lough]

Does anyone know what type of head stock this is, is it a dual head, euro head stock and something else
https://www.donedeal.ie/tractors-for-sale/mailleux-loader-to-suit-four-cylinder-claas/24933981

 

[Win]

Does anyone know what type of head stock this is, is it a dual head, euro head stock and something else
https://www.donedeal.ie/tractors-for-sale/mailleux-loader-to-suit-four-cylinder-claas/24933981

Almost looks like a no'3 as well as no'8................Is it a headstock off a narrower loader that's been adapted/widened for a MX?

 

[lough]

Almost looks like a no'3 as well as no'8................Is it a headstock off a narrower loader that's been adapted/widened for a MX?

It looks like something that has been modified all right

 

[thisyear]

Might be a stupid question, but does anyone know where a dual headstock for tanco and euro can be got?

 

[bk1991]

Might be a stupid question, but does anyone know where a dual headstock for tanco and euro can be got?

theres few crowds on done deal making head stocks to your requirements . Look up taylor attachments they could make you one https://www.taylorattachments.co.uk/