710s on a mower tractor?

If its side mounted i can't see the problem:001_unsure: As you'll be running on cut grass.

Many people use 650's when mowing so going up to a 710 isn't a big difference.
 
Worst case you are missing 4 inchs of cutting width.
I cant really see a problem
 
I have had no problems when mowing not noticed runing on any other grass that's with a trailed 10ft mower.
 
Thought as much!

Depends on how much you can offset the mower without doing harm to drives.

The tractor you are using is quite big anyway compared to the size of the mower so guess some comprise will be required.
 
depends on the width of row your leaving,
offsetting a trailed mower more or less, wont make any difference.
i leave a 4'6" row for the baler when they dont want it raked and the 650's do tramp the sides of the row slightly, which is harder to lift when its tramped on.
but mostly id mow with the fins out flat on the ground and after turning it gets raked up so tyre size dont matter.
i only have 650's on coz the ground is so soft round here, would like 710's but wouldnt chance it for the above reason.
if the row is narrow n tall for the harvester or wagon 710's wont affect it.
 
You must log in or register to reply here.
Back
Top