I'm Looking For...

Anyone know of where you can get heavy wall pipe . 60mm id 80mm od. Must be seamless . Digger bucket bosses might do but od can’t be greater than 80mm

I think precision steel they are called in the Easy way business park in limerick. Beside United metals

Anyone machining steel would have some.
 
Anyone know of where you can get heavy wall pipe . 60mm id 80mm od. Must be seamless . Digger bucket bosses might do but od can’t be greater than 80mm

I think you might find it difficult to get an 80mm od section. If you have a look at these two sites there's no 80

http://www.impactirl.ie/hot-finished-seamless-tubes.php

http://rfl.ie/products/circular-hollow-sections/

I came across this after typing the above https://www.vanleeuwen.com/en/products/seamless-tubes/
80 60 tube.PNG
but they don't sell to the general public, you'd have to have an account with them or get someone with an account to buy it for you. Office in Tullow, Co. Carlow
 
I know of an Izuzu Dmax , 04 failed test on chassis less than 2 months ago.
He had a Cork man in the yard handing him 1200 notes for it , and he let him go , because the buyer wanted to drive it home there and then .
will pass on the message
 
I have lengths of 67mm id 90mm od and also lengths of 36mm id 72mm od. Not within your requirements unfortunately.
Sizes are not set in stone yet . Looking to make up a sideshift to go on to the feeding bucket that landed here today . What ever bore bushing`s i use will also have to be able to get solid bar to match it . Will start a seperate thread when i`v a better idea of what i need . Had 60 od and 80 id in my head as would fit in 100 x 100 x 8 box .


Hollow bore I’d say is the stuff you’re after moreso than pipe. Any good size engineering outfits should have something
:Thumbp2:

I think precision steel they are called in the Easy way business park in limerick. Beside United metals

Anyone machining steel would have some.

I think you might find it difficult to get an 80mm od section. If you have a look at these two sites there's no 80

http://www.impactirl.ie/hot-finished-seamless-tubes.php

http://rfl.ie/products/circular-hollow-sections/

I came across this after typing the above https://www.vanleeuwen.com/en/products/seamless-tubes/
View attachment 73604
but they don't sell to the general public, you'd have to have an account with them or get someone with an account to buy it for you. Office in Tullow, Co. Carlow
Would have dealt with precision and impact in the past
 
Sizes are not set in stone yet . Looking to make up a sideshift to go on to the feeding bucket that landed here today . What ever bore bushing`s i use will also have to be able to get solid bar to match it . Will start a seperate thread when i`v a better idea of what i need . Had 60 od and 80 id in my head as would fit in 100 x 100 x 8 box .



:Thumbp2:




Would have dealt with precision and impact in the past

I bought 50mm square of precision engineering. 2" sq wouldnt do what I wanted. They had a big range when I was looking into the workshop
 
Sizes are not set in stone yet . Looking to make up a sideshift to go on to the feeding bucket that landed here today . What ever bore bushing`s i use will also have to be able to get solid bar to match it . Will start a seperate thread when i`v a better idea of what i need . Had 60 od and 80 id in my head as would fit in 100 x 100 x 8 box .



:Thumbp2:




Would have dealt with precision and impact in the past

Is precision and impact the one company or is precision a different company?
I had a look at the impact website, would they deal with someone looking for two pieces of steel tubing about a foot long or do they just deal with bigger customers
 
What may suit is bushing bar. Your best bet maybe to call to local engineering company that specialises in lathe work as they may have stock left over from previous fabrications.
 
Is precision and impact the one company or is precision a different company?
I had a look at the impact website, would they deal with someone looking for two pieces of steel tubing about a foot long or do they just deal with bigger customers
Ya impact will deal with you no problem . I rang them and was put through to a salesman. Landed what I wanted in the yard here on a pallet
 
Looking for a second hand set of 520/70/38's and 420/70/28's. Proveing hard to find... Don't think the tractor is doing enough to justify a new set but might have to bite the bullet yet!
 
Looking for a second hand set of 520/70/38's and 420/70/28's. Proveing hard to find... Don't think the tractor is doing enough to justify a new set but might have to bite the bullet yet!

j and r tyres prosperous , have 520/70 38 near sure , as I was just onto him looking for 580’s
 
Looking for pair of used good condition 18.4 x 30 tyres for an old Massey. Sligo Mayo or galway. Cheers

Folks,

Looking for 2 rear rims for a dexta.

Rims off a 2000, 3000, 2600 or 3600 will be ok too.

Looking for a second hand set of 520/70/38's and 420/70/28's. Proveing hard to find... Don't think the tractor is doing enough to justify a new set but might have to bite the bullet yet!

Mick King would have what all 3 of ye are looking for.
https://www.donedeal.ie/tractors-for-sale/600-65-30-firestones/14776324
He's at Derrynacreve between Ballinamore and Swanlinbar.
I was in his yard last week and he has everything and anything in the line of wheels and tyres and he's not that hard on money.
 
Anyone know of where you can get heavy wall pipe . 60mm id 80mm od. Must be seamless . Digger bucket bosses might do but od can’t be greater than 80mm

Bit of machining and plenty of €€ and your sorted localish
 

Attachments

  • 20200121_142507.jpg
    20200121_142507.jpg
    289.7 KB · Views: 96
Mick King would have what all 3 of ye are looking for.
https://www.donedeal.ie/tractors-for-sale/600-65-30-firestones/14776324
He's at Derrynacreve between Ballinamore and Swanlinbar.
I was in his yard last week and he has everything and anything in the line of wheels and tyres and he's not that hard on money.

He was my 1st call this week. Sound man surely, we have dealt with him a few times. Have to ring him back later in the week. Was looking to see if theres anyone else out there so as to compare the market.
 
Back
Top