Massey Ferguson

Sloping bonnet 690 :yes:

https://www.donedeal.ie/tractors-for-sale/massey-ferguson-690t/24062867

MzZhMjgwNzk2M2MxZjk2ZGZmNmM1ZGQwNTZjOGViZDkBnORZbv0p5-wjPSlnyBO_aHR0cDovL3MzLWV1LXdlc3QtMS5hbWF6b25hd3MuY29tL2RvbmVkZWFsLmllLXBob3Rvcy9waG90b18xNDA3NDU0ODB8fHwxMjAweDEyMDB8fHx8fHx8fA==.jpeg
 
Random idle question, but whats the difference between a 5470 and a 6470 of the same era? is it just a lower spec level? they're both 3000 series evolutions arent they?

Lower spec level, I don't think the backend is as strong on the 5400 series. Later models, Dyna 4 only on the 5400 and Dyna 6 only in the 6400 series.

The 5400 is more of a successor to the 300 series while the 6400 is like the 3000 series as you say.
 
The 6400 succeeded the 6200 which replaced the 6100,which replaced the 3000s.
The 5400 succeeded the 42/4300 series which replaced the 300s.
Same Gima back end in 54 and 64s. Apart from the dyna 4/6 option,there's little difference in them. Bit pointless really,I'd have thought....
 
The 6400 succeeded the 6200 which replaced the 6100,which replaced the 3000s.
The 5400 succeeded the 42/4300 series which replaced the 300s.
Same Gima back end in 54 and 64s. Apart from the dyna 4/6 option,there's little difference in them. Bit pointless really,I'd have thought....
Backends of 5400 and 6400 series are a good bit different
 
Random idle question, but whats the difference between a 5470 and a 6470 of the same era? is it just a lower spec level? they're both 3000 series evolutions arent they?
A friend had a 5470 with a 966 loader on which is a big lump of a loader and it didn't look out of place. Seemed a lot bigger type tractor than a 4270.
 
Just realised, I'm thinking it's the 54 and 6200 series have the same back ends! Thanks Bcl.
Same trumpet in 6270 !! Speaking from experience but I thought the backend was different. 6280/90 is different. I don’t think 54 had closed centre at least earlier ones?
 
Have a 5475 here in work with ccls 11 reg . Has 11,300 on the clock never seen a spanner to it all its got is an blower fan motor last year . Brakes never neen touched considering it spends have the year pulling a bale trailer . A great work horse that holds on forever .
The 5480’s and 5475’s definitely could be got with ccls remember pricing both in ‘11.
I thought the 64 backend was heavier than a 54 is there much difference in in lift capacity?
Are the brakes different a lot of 6480’s wud be 50k at least transport spec ones.
5475’s wud be 40k.

here’s a 5480 with ccls
http://www.parristractors.com/used-farm-machinery/details.php?src=1&id=2262
 
Had a 699 like that. Gearbox was ok for the time, rust a big issue and could have done with 4wd as it would slip on a dung pat
 
I’ve an engine off a 699 mated to a 2wd front axle off a 698,I’m on the lookout for a decent backend to marry it to,trouble is you very rarely find a Massey with a fecked engine.
 
Back
Top