Can’t find parts for a zetor crystal 8011

Discussion in 'Machinery Matters' started by Robert8011, Nov 9, 2019.

  1. Robert8011

    Robert8011 Member

    Joined:
    Aug 14, 2019
    Messages:
    6
    Hello I have a zetor crystal 8011 I need a wiring harness but can’t find one anywhere and what is the box with switches on the left called I new one of those any help is appreciated.
     
  2. Blizzard

    Blizzard Well-Known Member

    Joined:
    Mar 20, 2014
    Messages:
    146
    Where are you based Robert?
     
  3. jf 850

    jf 850 Well-Known Member

    Joined:
    Nov 23, 2013
    Messages:
    6,546
    Location:
    Co Laois
    Welcome to the forum a Robert .
    As @Blizzard says , location would be a big help .
    @ZetorMan98 wired a 1975 zursus 385 , basically the same tractor himself . There seems to be an awful lot of wires not doing much .
    There is a crowd in Co Longford go to some vintage rally, Brewster Electronics , who make looms for older tractors. I thought them reasonable enough with other electrical items they were selling.
     
    max and ZetorMan98 like this.
  4. Kieran97

    Kieran97 Well-Known Member

    Joined:
    Nov 16, 2013
    Messages:
    1,732
    Location:
    Ireland.
    As jf says, brewsters could be a good shout. A look at the website says harnesses for 6911s and stuff but nothing for a crystal. Not savage dear for the loom either.

    Would be worth contacting him. I'm sure he could make one up.

    https://www.tractorelectrics.ie/search?q=ursus*&type=article,page,product
     
    jf 850 likes this.
  5. Robert8011

    Robert8011 Member

    Joined:
    Aug 14, 2019
    Messages:
    6
    I am in Offaly Ireland. I try them do you know where to get the box on the left hand side next to the door?
     
    Blizzard and jf 850 like this.
  6. johndeere6920s

    johndeere6920s Well-Known Member

    Joined:
    Jun 21, 2013
    Messages:
    14,074
    Location:
    south west ireland
    Whites garage turnafulla
     
    Blizzard likes this.
  7. jf 850

    jf 850 Well-Known Member

    Joined:
    Nov 23, 2013
    Messages:
    6,546
    Location:
    Co Laois
    Michael Brogan in Cloghan used to be fairly good for Zetor spares , but I haven't been there for possibly 5 years now.
    I find Tom Poole in Rosenalis Co Laois excellent for parts and advice . Which wouldn't be far from Tullamore .Working on Zetors for most of 40 years . If he hasn't it in stock , he will have it in 48 hrs definitely.

    I'm not sure what you mean by the box on left hand side near door.
     
  8. Robert8011

    Robert8011 Member

    Joined:
    Aug 14, 2019
    Messages:
    6
    Thanks will they the people you recommend and here is a picture of the thing I mean
     

    Attached Files:

    jf 850 likes this.
  9. Blizzard

    Blizzard Well-Known Member

    Joined:
    Mar 20, 2014
    Messages:
    146
    As @johndeere6920s says, Ted White, Tournafulla, near Newcastlewest, Co. Limerick. 06981101
     
  10. ZetorMan98

    ZetorMan98 Well-Known Member

    Joined:
    Jul 6, 2015
    Messages:
    438
    Location:
    Galway
    They’re basic enough in terms of wiring. There’s a polish guy in cork advertising zetor parts on DoneDeal. Bart is his name. I got a loom from him and fitted/modified it to suit my own tractor. You’ll need a good head on you for at that work though. They’re basic but you still have to know what you’re at. There’s a second Ursus here that’ll be getting restored at some stage, along with 2 smaller Zetors and I’ll be building up looms from scratch myself for them.
    On the switch panel, you can’t buy the full piece as far as I know. They were originally part of the cab and welded in place. I have standard rocker switches put in mine
     
    jf 850 likes this.
  11. Ptk44

    Ptk44 Well-Known Member

    Joined:
    Jun 21, 2012
    Messages:
    1,755
    Location:
    Kildare Ireland
    CE27D6AA-BCF4-449C-A223-FCD9252997BC.jpeg 8FA7EB02-2E10-4AA4-AAF5-1867064C857B.jpeg 30975E4C-4D8D-45E6-B9EB-B8262FD0A0A4.jpeg
    I bout some crimpers for non insulated ferrules recently. Should have done it a long time ago. Bought for both ‘regular’ non insulated and also the superseal connectors. Very happy with them. Not used in anger yet. But should leave a more professional, effective and safer finish than insulated terminals.
     

    Attached Files:

    100-90DT, ZetorMan98 and Username like this.
  12. Username

    Username Well-Known Member

    Joined:
    Feb 1, 2013
    Messages:
    712
    Location:
    Meath, Ireland
    Lovely looking job. Where do you get the terminals etc?
     
  13. Ptk44

    Ptk44 Well-Known Member

    Joined:
    Jun 21, 2012
    Messages:
    1,755
    Location:
    Kildare Ireland
    Bought on amazon.

    The first set that you see was an el cheap set I bought just to see how good or bad they were. C.£20.

    The superseal crimper is a durite crimper and c.£50, it feels the job but the first one is perfectly fine.

    Durite crimper DURITE RATCHET CRIMPING TOOL FOR... https://www.amazon.co.uk/dp/B00A692ORM?ref=ppx_pop_mob_ap_share

    El cheap non insulated crimper Preciva AWG22-16 Crimping Tool... https://www.amazon.co.uk/dp/B07H4LCNKT?ref=ppx_pop_mob_ap_share

    Superseal connectors - note they come in many different configurations and can also be got in larger size for higher current rating. . IMAGINE 2 Pin Connector 20 Set... https://www.amazon.co.uk/dp/B07TG8PWCB?ref=ppx_pop_mob_ap_share
     
    Username, 100-90DT and ZetorMan98 like this.
  14. Ptk44

    Ptk44 Well-Known Member

    Joined:
    Jun 21, 2012
    Messages:
    1,755
    Location:
    Kildare Ireland
    11E6C422-3D65-416A-A075-A624FAD06A9C.jpeg Also after crimping you slip the insulated cover over the terminal - you can see the cover further back the wire in the picture
     
  15. ZetorMan98

    ZetorMan98 Well-Known Member

    Joined:
    Jul 6, 2015
    Messages:
    438
    Location:
    Galway
    It’s something I must buy. I do just use the regular insulated crimp connectors. Never had any problem with them as I have a good crimper, but I know plenty that have had bother with them. But as you said, can look a little unprofessional. I’ve also started buying heat shrink crimps but haven’t used many of them yet
     
  16. Robert8011

    Robert8011 Member

    Joined:
    Aug 14, 2019
    Messages:
    6
    Hi does anyone know if pat pool sells zetor crystal red paint? and if not is there anywhere i can get it in a shop?
     
  17. jf 850

    jf 850 Well-Known Member

    Joined:
    Nov 23, 2013
    Messages:
    6,546
    Location:
    Co Laois
    You can get it in most Farm machinery places . I got it in Delaneys Of Ballaghmore , when I got the bonnet sprayed of an 8145. Be aware there are 2 different shades of " Zetor Paint ". Basically the older and newer . You Need the older. What I got was, MK 42 TRACTOL 329 ZETOR RED.
     
  18. Mf 7715

    Mf 7715 Well-Known Member

    Joined:
    Sep 29, 2017
    Messages:
    1,493
  19. Robert8011

    Robert8011 Member

    Joined:
    Aug 14, 2019
    Messages:
    6
    Hi I am looking for a zetor crystal 8011 power steering pump complete anyone know where to get one???
     
  20. agrimax

    agrimax Well-Known Member

    Joined:
    Dec 2, 2009
    Messages:
    474
    Location:
    Co Down
  21. Arthur

    Arthur Well-Known Member

    Joined:
    Jan 10, 2013
    Messages:
    16,195
    Location:
    Munster
  22. Robert8011

    Robert8011 Member

    Joined:
    Aug 14, 2019
    Messages:
    6
  23. Arthur

    Arthur Well-Known Member

    Joined:
    Jan 10, 2013
    Messages:
    16,195
    Location:
    Munster
    Look again, he's also listing 2 types of steering ram for 8011's
     
  24. Vry

    Vry Well-Known Member

    Joined:
    Apr 16, 2013
    Messages:
    511
    Location:
    Co Kildare
    I have the compressor and the bar that holds up the draw bar from an 8011 if its if any use to someone.
     

Share This Page