Dont suppose you have air on the tractor?
Someone who used post here years ago used an airbag instead of a spring on the drawbar and could then pump it right up to drop the tail of his low loader.
CAT something was his username I think?
@Win is the ramp hinged?
Bonjour! Don't the French do 50k? Its probably light or camera angle but the transmission oil in the sight glass looks black? really black!!2003 Steyr CVT170 with 5,500hrs for €23,000
https://m.agriaffaires.co.uk/used/farm-tractor/18948751/steyr-cvt170.html
Bonjour! Don't the French do 50k? Its probably light or camera angle but the transmission oil in the sight glass looks black? really black!!
That is a fair tidy machine. When we were getting the 1170 a few years ago the idea was thrown around that we put a loader on it and operate thru the joystick, so we got sent to look at that tractor to get a feel for the operation.
Don't over fill it as a lot seem to do up to the mark on the sight glass with engine stopped, did you do both filters on the transmission suction and pressure?Thanks, I saw that one but thought that would be the filler for the PTO since it was right at the back
Yeah put it at the right level when switched off, about half way up the sight glass.Yea done both filters. Some one has put a mark on the site glass about 10mm above the line. It use to sit in the middle of the glass when turned off and right at the bottom when running. Should it be at the right level when switched off?
It looks like something out of a Mad Max movieView attachment 49237
2002 cvx170 that's just been turned into a hedgecutter
'Beyond the shelter belt' ????? i'm presuming @Big hit 199 is in New Zealand?It looks like something out of a Mad Max movie
OUCH!! That hardox is strong stuff. barely scratched the paint.
OUCH!! That hardox is strong stuff. barely scratched the paint.
The system pressure needs tweaking up a bit, there's a plug on top of the transmission casing that you can put a guage on, there's a pic on the last page here of a guage connected, the pressure should be 28-30 bar but can be up to 32 bar. I will have to do a pic of where to adjust it up but this is where the guage goes on, you will need a 14mm adaptor to screw in the transmission and a guage that goes up to a max of 50 bar.Hi lads, tractor keeps coming to a stop showing codes sgr 113 114 118 witch is all low trans pressure related. All filters and oil etc have been done. haven’t owned it long any easy fix or is this a pump problem?