Discussion in 'Pictures and video' started by irish eddie, Dec 12, 2014.
Anyone tried the Mizuri head with the rotary blades yet?
Say a 1.8 ton cutter and a 7 ton tractor
5.5 ton on rear wheels then a 20ft shift to the left
Looking like 3.5 to 4 ton on the tyre
The weight on that wheel is not really a problem, it's the lack of weight on the wheel the other side.
I think the name makes them sound worse than they are
Isnt that the lad that started spearhead??
What can a 650 55 r38 tyre carry?(genuine question)
There's a lad here with a ferri and he says he won't buy a other.
Theres a fine orsi on done deal
Maybe it's so good it'll last him a lifetime...
Arbocut is by far the most popular around here
What pressure do you run in the left wheel?
Used to run 26psi in the rear with the michelins
Got 20 at the mo with bkts but need to up it a bit
I got to have 34-35 psi in the 520's but 18psi is fine in the 800's. I'd have the 800's on all the time for trimming only for the damn narrow lanes, so much more stable with them on.
I'm running 35psi in the rear left, a 600/65/38 Pirelli, the right at 25psi. needs all the 35psi when at full stretch.
Do you not find it rocks a bit as both tyres arnt same pressure?
Now if I've read the document correctly, Michelin multibib 650 65 r38 @23psi can carry 4500kg at 40kph.
Depends on the ground but then again you would rarely be at full reach on a good surface like the road, the field margins here are choppy enough as they got hocked with stock last spring then went rock hard with the dry summer, you'd be bobbing around a bit no matter what setup.
But you will get away with less as you haven't got the head at full stretch doing 40kph
At 10kph the weight can go up to 5390kg at the same pressure.
Ok wasnt sure what the max was
Hedges here are gone a bit strong,they weren’t done last year because the ground was in pure sh1te.
Pile of places went too soft and got skipped last year.
Catching up on them this year though.
Some 4 and 5 year growth taking 10 passes.
Made a start few weeks ago
About 100 hrs left to do, been going constant since the start... .