VRY's photos

[Win]

View attachment 72594 View attachment 72595 View attachment 72596 View attachment 72596 @Win

Interesting stuff, do you know what sort of cost it is to refurb one of those engines, V16 are they??

 

[Vry]

No idea of cost the trucks run mostly 3516s and the 785 run 3512

 

[diesel power]

What hp are those V16's turning out @Vry

 

[WestCorkBoy]

What hp are those V16's turning out @Vry

Would you get one into the dodge??

 

[Arthur]

Would you get one into the dodge??

Or a Fordson Major @johndeere6920s

 

[Paw]

Would you get one into the dodge??

Stretch the chassis a bit and uprated suspension. Might need to raise the seat a bit to see over the top, or make it rear engined.

 

[johndeere6920s]

Or a Fordson Major @johndeere6920s

I know where there's a v12 deutz.
Trouble is I don't think the majors fuel tank would hold enough to fill the injector pipes

 

[Vry]

What hp are those V16's turning out @Vry

About 1750 hp but were are at 4500m so the oxygen is 40% less and atmospheric pressure is about 9 psi as opposed to 14.5 at sea level. They have bigger turbos x4 and different injectors also. You would have to dyno one up here to really know what power.

 

[Vry]

 

[Vry]

A few from the MAK training centre.

 

[Vry]

Crank shaft from Cat 3618

 

[jf 850]

About 1750 hp but were are at 4500m so the oxygen is 40% less and atmospheric pressure is about 9 psi as opposed to 14.5 at sea level. They have bigger turbos x4 and different injectors also. You would have to dyno one up here to really know what power.

It should be nearly enough for @diesel power s Dodge...

 

[Vry]

 

[Vry]

The last picture is a duratray body a 4 inch rubber sheet forms the bottom of the box. The tyre is a 37 R57.

 

[Win]

View attachment 73131 View attachment 73132 View attachment 73132 View attachment 73133 The last picture is a duratray body a 4 inch rubber sheet forms the bottom of the box. The tyre is a 37 R57.

Now that's what I call a wheel changer!! How well does the rubber stand up to that job??

 

[Vry]

Wears better than steel but the drivers dont like them as the centre of gravity is higher

 

[lough]

View attachment 73131 View attachment 73132 View attachment 73132 View attachment 73133 The last picture is a duratray body a 4 inch rubber sheet forms the bottom of the box. The tyre is a 37 R57.

Have you got any more photos of that last one from the back or different angles

 

[Vry]

That's all I have and I'm now off site thankfully.

 

[Vry]

The wolves got a marco polo last night, there was a safety warning that they were about last night.

 

[Vry]

Been welding a bit lately made a new wicket door for the shed and added a rockspike kit to the post driver. Fitted a 6 slice valve for the extra functions . Top link now controlled from the post driver.

 

[Vry]

Made this to carry my fencing tools and use the ex hand wash tubs for staples and stuff.

 

[massey 6480]

What make post driver is it . Home made rock spike or did you buy a kit . Great idea on the tubs for holding tools might borrow that ....

View attachment 74103 View attachment 74104 View attachment 74105
View attachment 74106 View attachment 74107 View attachment 74108 View attachment 74108 Been welding a bit lately made a new wicket door for the shed and added a rockspike kit to the post driver. Fitted a 6 slice valve for the extra functions . Top link now controlled from the post driver.

 

[Vry]

It's a Wrag a UK built driver the kit came from them €1900 delivered to me. The tubs are Bardhall hand wash tubs.

 

[Vry]

A bit of a difference in size, but the boss would chance the Liebherrs to.

 

[Vry]

A strange looking machine, the counter weight pushes out away from the rear of the machine.