Farmer Murph
Well-Known Member
Cheers towbar 👍🏻Adjusted brakes as well few pics attached
Cheers towbar 👍🏻Adjusted brakes as well few pics attached
Need to press clutch...So got the cardan done wasn’t too bad in end but good tip for anybody doing it. When I was taking it out the dowels came with me in the bearing housing. Had I pulled them out of that housing would have being much easier to remove it around all the other obstacles. Much easier going back in.
I bled the brakes using a pressure supply pipe but despite manual saying to bleed it nothing came from the clutch bleed item 3. Should it. I would think it wouldn’t unless I was pressing clutch?
Start engine...Note to adjust brakes you need front wheels off ground and then you only need to lift one side at a time on the back. I was trying to keep all 4 off which was unnecessary
Yes engine running so do I need the pressure pipe attached to bleed clutch or is it completely separate ?Start engine...
Completely separateYes engine running so do I need the pressure pipe attached to bleed clutch or is it completely separate ?
To get 2wd so you don't need to lift the frontStart engine...
Where were you a few hours ago!!!To get 2wd so you don't need to lift the front
Rare tractor. Dead enough with the vario nox
You could map her up to 145hp same as 7480.Rare tractor. Dead enough with the vario nox
I think theres a mechanical fuel pump in that one tho .I could be wrong tooYou could map her up to 145hp same as 7480.
A fine machine, well may it wear. A stainless steel exhaust? they are the only job.New member to the high hour 7400 club. 2008 7495 with 9,500hrs. Bought up north, arrived yesterday and will be doing the vrting next Tuesday - will post after on my experience and the documentation process.
Cheers gone. That’s definitely on the list of things to do after I get the VRT out of the way.
She’s had the brakes done (incl Cardon brake) as part of the pre sale service. How do I make sure the transmission is calibrated? Never been a 7400 on the farm before, so I’m a complete newbie on these!Calibrate the transmission too
You beat me to it - fair play headcase, I appreciate it.Follow the instructions exactly other wise it wont work
Which manual is that from?
Do it with warm transmission oilYou beat me to it - fair play headcase, I appreciate it.
Workshop manualWhich manual is that from?
Sound 👍🏻Workshop manual
PM me your email and when I remember I'll send you a pdf copySound 👍🏻