Welger 245 net problem

Becauka

Well-Known Member
We can't keep the net brake tight.
It has to be tightened every few bales.
Do the disc or pads wear, and need replacement?
Thanks.
 
Sounds like the brass nut that tightens the brake is not looked properly. Take out the 6mm bolt that looks it check the threads a bit of wd and tighten again. Work the brake by hand and see what happens
 
Make sure the lever with 6mm bolt is rite tight up against brass nut before tightening locking it. Think it happened me with rp235 before.
 
Came across this there now explains very simply how to set up the net system on the welger / massey /fendt baler .
 
Back
Top