Did you get one nashmach?Could you not make something with some u bolts and wing nuts instead?
It seems the Panasonic tablet is hard enough got now unless you want to brave Brexit and customs charges etc
I got mine from this crowd, used address pal to save a bit on postage. Customs was around €40. They do specify that it has lan port in the descriptions which was what steered me that way. Condition of the tablet is spot on, minor mark on one of the rubber corners but I think that was the only thing. Oh and I only realised after that it has a SIM card slot, I tried to open it but the 2 screws seem to be very tight and any of the small screwdrivers I had don’t seem to want to fit in securelyDid you get one nashmach?
Do most of them not have a Lan port? I'm finding it difficult to find one saying or showing it has it.
Did you get one nashmach?
Do most of them not have a Lan port? I'm finding it difficult to find one saying or showing it has it.
If you can’t find one with a loan port, it’s not the end of the world.Did you get one nashmach?
Do most of them not have a Lan port? I'm finding it difficult to find one saying or showing it has it.
Cheers. I ordered from the link above anyway same a drew and Nash. So I will definitely have more questions as we go. 😁If you can’t find one with a loan port, it’s not the end of the world.
All tougpads will have usb ports, and you can buy a usb to ethernet (lan port) adaptor. You can get them on eBay or Amazon.
Bought the same one as drew, not here yet, it's in the AddressPal place as I type!
If you can’t find one with a loan port, it’s not the end of the world.
All tougpads will have usb ports, and you can buy a usb to ethernet (lan port) adaptor. You can get them on eBay or Amazon.
Cheers. I ordered from the link above anyway same a drew and Nash. So I will definitely have more questions as we go. 😁
are you all going to go to Autosteer
oh you willNo, although headcase reckons I will in time...
Not initially but something I wouldn't mind tinkering with sometime even though I have practically no need for it.are you all going to go to Autosteer
Not initially, but like @eddie86, it's something i will likely experiment with [once i become more versed with the system].are you all going to go to Autosteer
Yes. That’s the kit I fitted, as I said above I know I could probably buy all the bits cheaper but tbh I wanted it up and running and it’s neat and tidy and everything there in one go, if you were buying all the bits and pieces the over all price would probably look ok till you add each delivery cost for bits coming here and there, and potential customs charges could catch you out ordering from England to here.https://agopen.shop/product/geared-agopengps-kit/ anyone bought this? Whole setup there for you
No that should do it.I have the basic starter kit and the toughpad ordered now. Is there anything else I need to be lining up? (other than mount for the tablet and box for arduino.)
I have the basic starter kit and the toughpad ordered now. Is there anything else I need to be lining up? (other than mount for the tablet and box for arduino.)
Data usb cable for when you get it and a way of charging the tablet would be also be worthwhile when your working on the mounting of itI have the basic starter kit and the toughpad ordered now. Is there anything else I need to be lining up? (other than mount for the tablet and box for arduino.)
what tractor you putting it on, and it will be a motor turning steering wheel rather than hydraulic valveSo the bits have arrived now to find time to set it up
It’s going on my little case cs94, motor turning steering wheel.what tractor you putting it on, and it will be a motor turning steering wheel rather than hydraulic valve
Turn subtitles to English?https://www.youtube.com/playlist?list=PLc_2Hp6lf8d-7kCBzHnbFZN5uJWHDhtwo
If anyone can translate 😂 is there a way of translating ?