Hi lads I have a bohballe m2w 2013 fert spreader. On the side is written dynamic control. It I run the cable from the GPS back to the control box of the spreader will it do section control???
the GPS in the case now is compatible to do section control and the boys are to send me the cable to go from the GPS to the control box. I may go digging more our contractor told me our spinner could do section control but am not sureMine is M2W machine and Trimble rigged it up to do Headland on off and reduce rate going in on a gearog Headland. They downloaded Bogballe software that could speak to the GPS .
I did not go with Trimble and there is no GPSvon the spreader tractor but I could put it on the Class and use its GPS . Teejet
Our neighbor bought a new bohballe this year with the full works. The two spinners look the same. The control box is slightly different then ours doh. He has it connected to a GPS. When you say actuators sometimes on my control box it comes up about themyes,its not just as simple as that,doubt you have the actuators either at the bottom of shutters to make it section control.
if it was section control ready it would probably be running off a touch screen ,only sold two of them and they were both running off the likes of a ipad,and gps and all on the screen
Did the dealer help you out as you said it had to do it for a bogballe or were you left to sort it yourself?