Free flow return on landini

Discussion in 'Machinery Matters' started by noel carroll, Sep 12, 2020.

  1. noel carroll

    noel carroll Member

    Joined:
    Sep 10, 2020
    Messages:
    8
    Landini vision 95 is there a free flow return on this tractor? It’s got 3 sets of spools there’s a front loader but can’t see a free return,??
     
  2. hagar

    hagar Active Member

    Joined:
    Feb 3, 2019
    Messages:
    37
    Location:
    sunny ayrshire!!
    If I remember rightly theres a blanking plug on left hand side looking at tractor from the back that you remove and fit coupling into. Going back a bit but I had a vision for short period 2007 ish and needed freeflow return for wrapper. dealer did it in half an hour.
     
    noel carroll likes this.
  3. max

    max Well-Known Member

    Joined:
    Mar 29, 2014
    Messages:
    1,861
    1599937178324574118238.jpg
    I'd be fairly sure you plumb it in here, to the left of the spool block, it feeds back into the back end on the same place as the oil filler
     
    noel carroll likes this.
  4. noel carroll

    noel carroll Member

    Joined:
    Sep 10, 2020
    Messages:
    8
    Will take a look at that pipe tomorrow to see if I can find that blank that’s what I need it for a wrapper
     
  5. hagar

    hagar Active Member

    Joined:
    Feb 3, 2019
    Messages:
    37
    Location:
    sunny ayrshire!!
    Thats the one:thumbup:
     
    noel carroll likes this.
  6. noel carroll

    noel carroll Member

    Joined:
    Sep 10, 2020
    Messages:
    8
    yep found that pipe easy enough to put a free return on that.. just out of curiosity could you put a direct feed to connect a bale wrapper valve chest to it as the spools on it the levers dont stay on, short of tying the lever to something to keep on be just easier to try and see if there is something right
     
  7. noel carroll

    noel carroll Member

    Joined:
    Sep 10, 2020
    Messages:
    8
    also very hard to find anything on google for these tractor!!
     
  8. massey 6480

    massey 6480 Well-Known Member

    Joined:
    Dec 27, 2011
    Messages:
    6,423
    Location:
    limerick
    I have a workshop manual for them if you want a copy of it . Have a 105 here at home .
     
    noel carroll likes this.
  9. noel carroll

    noel carroll Member

    Joined:
    Sep 10, 2020
    Messages:
    8
    Is it digital copy or paper
     
  10. massey 6480

    massey 6480 Well-Known Member

    Joined:
    Dec 27, 2011
    Messages:
    6,423
    Location:
    limerick
    Digital
     

Share This Page