Fusion 2

Discussion in 'Machinery Matters' started by Stephen French, Jul 31, 2020 at 6:20 AM.

Tags:
  1. Stephen French

    Stephen French Member

    Joined:
    Jun 9, 2019
    Messages:
    22
    Got a second hand fusion 2 for my own work what I'd like to know when the baler netts a bale I have to manually eject the bale in auto can't seem to find the function in the menu to change to do it autmatic anyone out there shed light on it cheers
     
  2. ponderosa

    ponderosa Well-Known Member

    Joined:
    Jan 29, 2017
    Messages:
    465
    sometimes control box thinks there is a bale on wrapper. if you leave on Auto and hit the door up button when knife trips, it should do it itself from then on. other wise turn off box and on again as your starting next bale and then go into auto and same again. thats what happended me a few times at least.
     
  3. Stephen French

    Stephen French Member

    Joined:
    Jun 9, 2019
    Messages:
    22
    Thank you will try next time out
     

Share This Page