hi. No it works on both speeds on the switch but that is another problem I have. There is only the slow speed workingDoes it vary depending on which tracking speed is selected?
You say it only works when you use pedals?how do you mean?Hi folks. I recen bought a fiat hitachi 135. I have noticed the the auto idle doesn’t work. when you press the A/I button it lights up but it will only work as it shou when you use the tracking pedals
any ideas thanks
if you move the hand controls nothing happens but if you move the tracks by foot petal it revs up as it shouldYou say it only works when you use pedals?how do you mean?
Sounds like the pressure switch for the joystick controls,there’s one for tracking and one for joystick controls.if you move the hand controls nothing happens but if you move the tracks by foot petal it revs up as it should
I don’t know for certain on your machine, but they are on mine, ex60-3, at the front of the control valve.Thanks. I will check this tomorrow. Are they both beside each other
Bit different to mine but I would say 8 and 9 are the 2 you are looking for.Prefect I have just found the drawings. So both switches for high/low and auto idle control these pressure switches ?
this could be way also my fast tracking won’t work
Any chance of a photo of the 2 switches?Just looked at those pressure switches. they are two different type pressure switches. Is this correct. One is a green smaller switch
How could I do a pressure test.Do a stall test at each corner of the track to see if its maybe a cut seal. Not that we'll up on Hitachi but it's normally a pump to each track motor so it could be one pump down a bit. Pressure test is the only way to tell .