I'm Looking For...

drew

Well-Known Member
Tarmac down so duct not possible. Isn there a point to point like dish option?

Yes, I haven't used any of them so no personal experience, but this article should come in useful:


It reads well, and elara stock them along with huntoffice.


I’ve a pair of the tp links running cameras across the yard and they are perfect, the one on the house is broadcasting WiFi that the phone can pick up but it can be a bit slower than if in the house. I got the last one off hunt office and I think it was delivered within a day or 2. They are nice and easy to set up to, and are POE so only need an Ethernet cable passed out to where it’s to be mounted


Just to add they don’t come with a mounting bracket, they are designed to be cable tied to a pole like a tv aerial or a satellite dish mount
 
Last edited:

scoffcruddle

Well-Known Member
Thanks for input. Is it it best hav camera plugged into receiver or is WiFi good enough inside relatively near sheeted shed?
I’ve my camera plugged into a modem,then the modem acts a junction that feeds my office and another wi-if repeater,I found another wi-if camera I had worked fine using wi-fi,if it’s not hard work I’d use an Ethernet lead direct into the camera though.
 

Cruiser

Well-Known Member
I’ve my camera plugged into a modem,then the modem acts a junction that feeds my office and another wi-if repeater,I found another wi-if camera I had worked fine using wi-fi,if it’s not hard work I’d use an Ethernet lead direct into the camera though.
Ok seams relatively straight forward🤞. Will go wit ubiquiti brand which still will only cost five monthly top up of sim. Thanks for help 👍🏼
 

mfield

Well-Known Member
McCarthy's in carrigtwohill were a Fraser dealer, may have one in stock. Failing that shannoncoilsprings in limerick may have one off the shelf.

These arrived from Shannon Coil Springs about a fortnight ago. They're a bit bigger than the originals but fit ok and stand about €60 delivered which is more than I thought I'd be spending but as it turns out, in light of my newfound familiarity with the spring trade, not that expensive after.

I'd still buy a mill if I got one reasonable - ideally a Junkkari.

Edit: Forgot to upload pic
 

Attachments

  • 20210924_130052.jpg
    20210924_130052.jpg
    670.8 KB · Views: 16
Last edited:

Bot.exe

Well-Known Member
The other question would be should I look for a wider rim to take a wider tyre in time? Would it make much difference if I got a 15" rim over a 14" with my current tyre width?
@gone
 

gone

Well-Known Member
The other question would be should I look for a wider rim to take a wider tyre in time? Would it make much difference if I got a 15" rim over a 14" with my current tyre width?
@gone
Sorry I missed this tag for some reason.
It really depends on what you plan to do with the tractor in the future, on grassland or loader work 65 series tyres would be a waste on a light tractor like that, in my opinion, personally I think 480/70r34 are a nice match for a MF4345 on grass and they can be put on 14" rims.
If it was me I would look around for second hand rims, then you may take what is available, but if buying new, it is hard to beat Agrigear and go for a 15" or even 16" rim, your current 420/85r34 tyre will fit and you are future proof so can go as wide as you want or even higher if you change the fronts at the same time.
 

Bot.exe

Well-Known Member
Sorry I missed this tag for some reason.
It really depends on what you plan to do with the tractor in the future, on grassland or loader work 65 series tyres would be a waste on a light tractor like that, in my opinion, personally I think 480/70r34 are a nice match for a MF4345 on grass and they can be put on 14" rims.
If it was me I would look around for second hand rims, then you may take what is available, but if buying new, it is hard to beat Agrigear and go for a 15" or even 16" rim, your current 420/85r34 tyre will fit and you are future proof so can go as wide as you want or even higher if you change the fronts at the same time.
Perfect, that's exactly what I needed to hear. Thanks
 

headcase

Very Senior Member
I'm looking for a 5furrow reversible plough to suit the 7480
Preferably auto reset,
Manual vari width is fine unless the plough is right price with hydraulic
Needs to have boards to take 650 tyres
Sub 5k if possible, dont mind a small project
 
Last edited:
Top