Well wear lad. Loader looks fairly big on itNot near as low as I had hoped, but if does the next 20yrs with as little problems as the 4345 I will be happy.
View attachment 101598View attachment 101599View attachment 101600View attachment 101601
Not near as low as I had hoped, but if does the next 20yrs with as little problems as the 4345 I will be happy.
View attachment 101598View attachment 101599View attachment 101600View attachment 101601
I have a landini vision here with loader on it and I am very happy with it don't know what height it is , have really only fed cattle with yet but cant fault it huge step up from what I hadI would suggest a landini powerfarm/vision but it may be a bit basic for tillage barons
A neighbour of mine has a t5050 I've driven a few times, I think it's a grand tractor.
I service a John deere 5820 for a lad every year, I quite like it, it's a good lively yoke, I do collect it/deliver it back sometimes about 8 or 9 miles away and it's very comfy. Hasn't given any trouble worth talking about in 16 years/7k hours. maybe another option.
Actually, it did have about the world's most expensive wiper motor fitted at one stage. E370 euros. Bit of a sting in the tail
Not near as low as I had hoped, but if does the next 20yrs with as little problems as the 4345 I will be happy.
View attachment 101598View attachment 101599View attachment 101600View attachment 101601
MF have unfortunately stopped offering the lowered cab option on their tractors, so it is 2.65M. Significantly higher than I wanted, but I bringing home the 135, so it can do the very low parts of the shed.Best of luck with it @gone really looks like a modern 390!
You mention the height, I assume It's still okay for where you want to go with it!!!
Would the bottom of the weights not need to be level with the bottom of the hook on the lift arm or do MF lift higher than NH TL'sTrying to make a weight that can be used with a trailer, not sure if I got it right, I am worried about the weights fouling the trailer when locking. Hopefully it will work without modification.
View attachment 101717View attachment 101718View attachment 101719View attachment 101720View attachment 101721
With the hydraulic toplink they should be, or at least very close to it.Would the bottom of the weights not need to be level with the bottom of the hook on the lift arm or do MF lift higher than NH TL's