All 67xx and 77xx MFs are being recalled at the moment for brake valve replacement, I wonder is that the issue?We have the same problem with our 7719s, they get air in the brake system and as a result the padelfeel is realy bad. It's a known problem at the dealer. Bleeding the brakes helps for a month or 3, after that the problems are back
i cant tell off the parts manual if theres a fitting to allow pressure bleeding like on the 7400Does the 7719 have pressurised bleeding?
A fine machine, well may it wear. A stainless steel exhaust? they are the only job.
Really looks the job.I went with a heat shield as opposed to a full stainless steel. There wasn’t much difference in the price and I liked the look of the MF symbol and lettering in the heat shield.
Bit dull today so hard to get a good picture. Not that impressed to be honest, may yet go with the full stainless.
View attachment 100041View attachment 100042View attachment 100043View attachment 100044
Nice job .if you go stainless ..where did you get the heat shield. Must get them for the 70 and 99
Jesus , bring her a cup of tea at least first 😂my bitch wont start this morning
turning over but wont catch
I just turned the light on kicked her up the arse,same as any other day.my bitch wont start this morning
turning over but wont catch
Be gentle, a good auld massage can work wonders 😊I just turned the light on kicked her up the arse,same as any other day.
is it a tricky part to replace?Seems the metering valve in the high pressure pump is faulty
Pump off as theres no room to unscrew it off the top of the pump🤦♂️is it a tricky part to replace?
Replace the seal,will only be €10 max.Anyone have to do the front axle input shaft seal. Is it likely I have a bigger problem if seal leaking or should I replace seal and see.
You could get a dial indicator and see if there's much movement.Anyone have to do the front axle input shaft seal. Is it likely I have a bigger problem if seal leaking or should I replace seal and see.
Is it 7480 suspended axle??Anyone have to do the front axle input shaft seal. Is it likely I have a bigger problem if seal leaking or should I replace seal and see.
True enough it probably will be no different. Maybe it does save it by tying all 3 brakes togetherif the rears are out of adjustment the cardan will still be doing the mans share of braking