Masseyrk662 pics

Ptk44

Well-Known Member
700 whitetorn in, hedge done now, something to be at these days anyway, hopefully allow me to take out a hedge between 2 tillage fields in another spot next year
What are you using to make the holes?

Need to do some planting here too.
 

eire23

Well-Known Member
you still have the propeller on the ajitator. We got a lot less blockages when we removed it
That propellor is a disaster... Why they send them out with it I do not know. An absolute torture when mixin slurry on the country.
 

jf 850

Well-Known Member
That propellor is a disaster... Why they send them out with it I do not know. An absolute torture when mixin slurry on the country.

I still have it on my 3000 agitator. It constantly has stuff wrapped around it .

If I was to cut it off , do I cut the shaft above it ,
Or , cut the star thing itself , leaving the shaft intact ?
 

greenhorn

Well-Known Member
I still have it on my 3000 agitator. It constantly has stuff wrapped around it .

If I was to cut it off , do I cut the shaft above it ,
Or , cut the star thing itself , leaving the shaft intact ?
Cut shaft and some of the stand. Madness leaving them on esp contracting
 

eire23

Well-Known Member
I still have it on my 3000 agitator. It constantly has stuff wrapped around it .

If I was to cut it off , do I cut the shaft above it ,
Or , cut the star thing itself , leaving the shaft intact ?
I don't know, it's still on the agitator at work. It's a 3000 as well. Nothing worse than spending 5 or 10 mins cutting net of it and putting it back down and the agitator starting vibrating again a few mins later.
 

ts115

Well-Known Member
I bought an auger for it, 180 Euro I think it was, they were 50 a day to rent. They were advertised on done deal
I planted 1200 whitethorn slips in two and a half days with one if these a few years ago, you'll have no problem sleeping those nights!


I just pushed the spade down into the ground, pulling it back towards you to open the ground, put the slip down the back of the spade and then pull the spade up and stamp the ground and on to the next one!
 

marco

Well-Known Member
Should you not use soft hands or something similar? Would the prongs let air into the bale and start it going off?
 

Masseyrk662

Well-Known Member
The Snapchat memories would depress ya at times, seen today this day 2017 we were spreading slurry with the big tanker and no issue at all... today it didn’t stop raining all day and the field being spread in video has a 3 acre flood in it
 

Attachments

  • 9AFA24F6-D45A-499A-8815-ACD236F3D689.png
    9AFA24F6-D45A-499A-8815-ACD236F3D689.png
    1.2 MB · Views: 59

Masseyrk662

Well-Known Member
Trying to delete some sh1te off the phone and came across some old pictures, said I’d throw them up
 

Attachments

  • 335C2DD6-03FC-4A6E-ACA2-9F211BA66D6B.jpeg
    335C2DD6-03FC-4A6E-ACA2-9F211BA66D6B.jpeg
    125.1 KB · Views: 98
  • 14E554BA-7757-43D2-8CCB-E459C96D9D22.jpeg
    14E554BA-7757-43D2-8CCB-E459C96D9D22.jpeg
    129.8 KB · Views: 97
  • 8E370DDC-604F-4ED5-806D-42457DE210A6.jpeg
    8E370DDC-604F-4ED5-806D-42457DE210A6.jpeg
    85.5 KB · Views: 96
  • C687F0A2-AA7F-47FB-A6ED-4BD6EC212568.jpeg
    C687F0A2-AA7F-47FB-A6ED-4BD6EC212568.jpeg
    102.8 KB · Views: 94
  • D0F37CD7-2962-4150-9424-B97A9CC978CD.jpeg
    D0F37CD7-2962-4150-9424-B97A9CC978CD.jpeg
    58.2 KB · Views: 96
  • BCDDFC36-D473-42AE-81F2-192D28E7E948.jpeg
    BCDDFC36-D473-42AE-81F2-192D28E7E948.jpeg
    53.3 KB · Views: 97
  • B37C3F66-63AB-404E-A8A8-03EFBF3AC346.jpeg
    B37C3F66-63AB-404E-A8A8-03EFBF3AC346.jpeg
    90.1 KB · Views: 96
  • D4149461-45EF-48BC-B169-81190DB0E0BC.jpeg
    D4149461-45EF-48BC-B169-81190DB0E0BC.jpeg
    102.4 KB · Views: 95
  • 749AB9B6-50F8-4BD6-B035-0BD9E838F3A5.jpeg
    749AB9B6-50F8-4BD6-B035-0BD9E838F3A5.jpeg
    101.6 KB · Views: 94
  • 32CCDB69-B40A-4E46-9C07-295B0907260A.jpeg
    32CCDB69-B40A-4E46-9C07-295B0907260A.jpeg
    80.6 KB · Views: 96

Masseyrk662

Well-Known Member
Few more
 

Attachments

  • E544B56E-0DCE-40CD-9041-25AEDAC1A341.jpeg
    E544B56E-0DCE-40CD-9041-25AEDAC1A341.jpeg
    98.3 KB · Views: 83
  • B7E6E404-0388-47CA-9041-970A76A2C394.jpeg
    B7E6E404-0388-47CA-9041-970A76A2C394.jpeg
    97.1 KB · Views: 82
  • 2D793A7C-69BF-4F31-AB42-C7C5DEB2AF64.jpeg
    2D793A7C-69BF-4F31-AB42-C7C5DEB2AF64.jpeg
    120.4 KB · Views: 82
  • 7AD0346F-8BF7-4729-AE29-31FE2BD3E0F8.jpeg
    7AD0346F-8BF7-4729-AE29-31FE2BD3E0F8.jpeg
    71 KB · Views: 83
  • D0EE86D2-43E7-4D25-9555-AFEE89279221.jpeg
    D0EE86D2-43E7-4D25-9555-AFEE89279221.jpeg
    63.9 KB · Views: 83
  • 8C285BF0-5546-4685-B6EB-3CCF2DD50F18.jpeg
    8C285BF0-5546-4685-B6EB-3CCF2DD50F18.jpeg
    81.9 KB · Views: 81
  • 28D57959-407F-44BA-A640-0FA788854670.jpeg
    28D57959-407F-44BA-A640-0FA788854670.jpeg
    87.2 KB · Views: 84

Masseyrk662

Well-Known Member
How have you such old pictures on a phone ? , Deutz 6.06 starcab..:detective:
That was a photo album in my grand uncles place and all the possessions in the house were left to another grand uncle so I didn’t want to go stealing the album and instead I just took the pictures of what I wanted which was the machinery 🤣 that 6.06 came from a tillage farmer in portarlington his name was E Fitzpatrick someone might recognise it I think he had it from new, it came with a mcconnell 9058 hedge cutter
 

Iggy

Well-Known Member
That was a photo album in my grand uncles place and all the possessions in the house were left to another grand uncle so I didn’t want to go stealing the album and instead I just took the pictures of what I wanted which was the machinery 🤣 that 6.06 came from a tillage farmer in portarlington his name was E Fitzpatrick someone might recognise it I think he had it from new, it came with a mcconnell 9058 hedge cutter
Eddie Fitzpatrick, he's a FF Councillor. He farms about 400 acres and runs Masseys now.
 
Top