Special offer's on tool's

Robbie260

Well-Known Member
For those off you into your welding esspecially tig welding aluminium.

https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.pl/ulk/itm/183149703564

These Sherman digitig 206P ac/dc tig welders are the bargin of the century they are essentially the last generation version of the Jasic tig 200p ac/dc mini painted blue, with only 1 year warranty instead of 5 and about a 3rd of the price.
https://www.jasic.co.uk/tig-200-acdc-mini-360spin

The link i have put up is too the cheapest i could find them on ebay, but type in the welders name and various sellers come up with them all in a similar price bracket. Some of the best deals come bundled with a pedal too but they seem too have sold out but pedals can be had for around £50 seperately on ebay. There is cheaper places though too get them all retailers seem too be based in Poland though and ship from there. We have a thread over on the mig welding fourm about them. Which covers all the possible places you can get them, similarities between it and the jasics etc.

https://www.migwelding.co.uk/forum/threads/sherman-tig-jasic-in-disguise.93719/
 

JohnBoy

Well-Known Member
lidl had a tiny grinder in recently, a pretty pointless toy of a yoke, but I bought it because the young lad has the drill with charger already and I'd seen something online I wanted to try out. around €30 for the grinder and battery.

upload_2020-6-11_12-32-48.png

I got a roloc adapter off ebay for about €10

upload_2020-6-11_12-34-14.png

Some chinese roloc discs for around €5

upload_2020-6-11_12-34-57.png

And shazam, a mini roloc sander/grinder. I've often seen them used in videos online, normally air powered but I don't like air grinders, using 3hp to run a tiny motor is just daft.

upload_2020-6-11_12-35-17.png
 

laoisfarmer

Well-Known Member
The latest Chinese plasma tips that I ordered recently had an expected delivery date of March 17. They arrived today.
Didn’t examine them too much, can’t be too careful now...:lol:
@MF30 have you a link for those tips, also need the top ceramic piece on the gun , any ideas
 

MF30

Well-Known Member
Will try find a link but be honest they're pure shite. Ceramic tips come with a set. Id try to buy them from the Lidl spares website if you can find it, theyre very good tips.
 

drew

Well-Known Member
Must buy a decent inverter welder if anyone spots any offer with black Friday around the corner :weld:
Have this one nearly 4 years, does a bit now and again but sits there in the shed a lot of the time which I’d say could be worse as there’d be damp getting into it.

it was 325 delivered when I got it off ept. I’d a parweld 160 before that which I see they do now too, I’d say it would still be going if it hadn’t been used cranked to the last welding wheel studs on a trailer one day...

 

max

Well-Known Member
Anyone looking for a 1" air impact gun, this seems good value to me, a proper named brand (CP) gun for the price of no brand rubbish.
I'm fairly sure that's the same as one I got a demo of last year, 550 of the local supplier, not sure was that plus or including, next one up was 950 + anyway.

It was no better than the second hand one I have 150 for of the lad in limerick. It may be a brand name but anyone in the know will tell you cp guns are not what they once were.
 

denis086

Well-Known Member
Anyone looking for a 1" air impact gun, this seems good value to me, a proper named brand (CP) gun for the price of no brand rubbish.
I’ve the short version a couple of years now from air impact and had no problems. The gun wouldn’t be over worked here just the odd wheel or tines etc. but very happy with it, it’s done everything I’ve asked and wouldn’t be without it now. The 200l 11/12cfm compressor runs it fine but I have 3/4” hose coming straight out of the end of the tank. Only ever struggled to keep up on an old lorry body taking off multiple rims with seized wheel nuts.
The only comparison I had was a very old gun I used a few times and a very cheap one we tried and handed back, and this one beats both from what I could tell.
 

Arthur

Well-Known Member
Must buy a decent inverter welder if anyone spots any offer with black Friday around the corner :weld:
..https://www.wholesaleweldingsupplies.ie/index.php?route=product/category&path=833_69
 

candor

Moderator/IT Guy
How dare you!!!!! my steaks are cooked to perfection.

@candor €54

They had a few makita cordless tools that looked strong enough money
That's a good price, I think I gave 75 for the same one back 2/3 years ago. Should be good for "polishing" off those steaks...
 

JohnBoy

Well-Known Member
It's not an amazing price, but not bad. I don't actually need one right now, but it can sit on the shelf until I kill another.
 
Top