Terex T200/T25 or Matbro TR200/250 Transmission oil leak

tommurphy73

Active Member
Hi,

I have a Terex T200 with an oil leaking from the transmission output shafts oil seals. I can remove the drive shafts but it is not clear how to remove the flanges from the output shafts of the transmission. They appear to be press fitted over the shaft but I dont have a manual to check if there is some other mechanism holding the shafts in place.

Does anyone know how to remove these flanges / shafts so that the oil seals can be replaced

Regards
 
When oil leaked out of the output shaft on mine the transmission was fecked,I got a fresh box out of a breaker.
 
I was wondering if anyone had a photo of a service manual for this transmission (It is the Terex TR250 and not the 200) I had mistakenly thought that both had the same transmission initially.

Regards
Tom
 
Back
Top