Hobbyfarmer
Member
I bought a new holland 2 years ago and recently got a front loader fitted. While using one day a slight strain came on the hydraulics (leever not released quick enough by 2 seconds) and it blew an oring on the pump at the rear left hand side of engine. Got that fixed and it's after blowing it again. There is a knob at the rear of the cab which seems to control the oil flow. It had been turned up full. In a previous life the tractor was used for hedge cutting and the pump may have been altered. I just don't understand how it is only blowing the oring since the loader was fitted. Each time it blew was when pressure came on the pump only for seconds
Thanks in advance
Thanks in advance