Wexford County Council must be repairing the roads better down your way than up here if you are able to go anymore than 22km/hr with the plough :rolleyes2::sweat:
Wexford County Council must be repairing the roads better down your way than up here if you are able to go anymore than 22km/hr with the plough :rolleyes2::sweat:
Do they look as good as the weidemann though? What's cdc steering, is that the joystick type??New fully loaded Volvos advertised in Germany L60h with cdc steering £118K L70h with cdc £130k,I'd say the rolls Royce of loaders so others have to be a fair bit cheaper.
Do they look as good as the weidemann though? What's cdc steering, is that the joystick type??
Has he had a change of mind about being sat on the side?? What's going to happen if you buy it is in 12 months time you'll say 'how did we ever manage without one, we should have bought a newer one!!'Ok ok ok
There has been a development!
Dad was chatting to a new sales man at a local dealer. Telling him the loader predicament and the likes.
'Ohhh I have a JCB loadall coming in next week, very very tidy 1996 machine' and father was intrigued by the price he reckoned on too!
So.
What to look for in a 1996 loadall?
Know nothing more than it's 1996 at the moment !!
I have an old Tanco slap bucket loader in the er, pile of stuff that might be useful someday and certainly isn't scrap in a corner :rolleyes2:. I'm sure I could fit that to the Valtra's front linkage, instant front loader .They haven't had a front loader on a tractor ever , AFAIK. A Major back loader before the Volvo . Zero to Hero.
Can't see him planting a loader on the new beast.
Has he had a change of mind about being sat on the side?? What's going to happen if you buy it is in 12 months time you'll say 'how did we ever manage without one, we should have bought a newer one!!'
Has he had a change of mind about being sat on the side?? What's going to happen if you buy it is in 12 months time you'll say 'how did we ever manage without one, we should have bought a newer one!!'
Anything that gets broke on the loader will be on the right hand side if that helps!!!!!Ha. That sounds like a possible scenario!
Seems the price has him looking past these small things!
I'm more concerned that it will be me fixing everything he breaks with it!
It's more the sheds and gateways about the yard I'm worried about! HaAnything that gets broke on the loader will be on the right hand side if that helps!!!!!
Is there a difference between agri spec and construction spec on telehandlers?
Always thought it was just the joysticks plumbed diffrently. But a mate of mine says the construction spec are much slower and less torque?
Is there a difference between agri spec and construction spec on telehandlers?
Always thought it was just the joysticks plumbed diffrently. But a mate of mine says the construction spec are much slower and less torque?
Figured there can't be much different.On The older JCB's It Was mainly The case That agri spec Were turboed And construction Were Not. That Was The main One I Think.
Figured there can't be much different.
A mate had hired a handler in and a construction spec one landed. Was new at the time (4 yrs ago maybe) and had 3 levers for the boom! And perhaps it was slowed up for the spec as you say. He sent it back!
Will look into it then.
@scoffcruddle would be looking at the older ones really. So puh and the likes would not worry me.
Would high flow be a bigger pump or just a restricter in the system?
Have you 2 loadalls, a Volvo and a weideman????Both my loadalls are 3 stick control,one does boom up and tilt,other is telescope and tilt,3rd lever is 3rd service,simple and reliable and the reason they have both passed 10k hours without any bother.
High flow is bigger pipes all round and electric spools as the manual spool block can't handle the flow,if you never drove a high flow it wouldn't bother you.
He will have when he leaves school.Have you 2 loadalls, a Volvo and a weideman????
Have you 2 loadalls, a Volvo and a weideman????
AKA the heavy metal disease... Often sufferers carry the vario virus also!Yes,I like to collect machines,it's my hobby.
I think a jcb419 is north of 100kNew fully loaded Volvos advertised in Germany L60h with cdc steering £118K L70h with cdc £130k,I'd say the rolls Royce of loaders so others have to be a fair bit cheaper.
I think i may have been infected and could possibly be carrying both diseases!!!!!!!:cry:AKA the heavy metal disease... Often sufferers carry the vario virus also!
I think i may have been infected and could possibly be carrying both diseases!!!!!!!:cry:
I think a jcb419 is north of 100k
Krammer looks a lovely machine there is a telescopic option too for the largest machine but think it's not being released till late 2019
At least you don't have to change attachments now.Well I mean how many loadalls is too many?
View attachment 66205
874hrs on the clock I just had to buy it,too cheap to miss.:Whistle2:
Well I mean how many loadalls is too many?
View attachment 66205
874hrs on the clock I just had to buy it,too cheap to miss.:Whistle2: