For Sale Winter clearout, roof thrusses, sheeting etc

[whichwire]

Have to move premises by christmas to its time for a clearout. Will start the ball rolling with these roof thrusses. They are a 50ft span, origionally from a mart, I bought them for a customer for a project but a structural engineer and other sizes and plans in mind

They were sandblasted and painted but need a fresh coat now. I can fix up with cleats (some were cut off for other plans) and provide pillars if needed.

Sold as seen for €2000 ono.

I have few more bits lying around and will post more details when I get a chance

7ft Corrugated sheets, Juniper green, approx 20 Nr

4 ft vented sheets, Slate grey, box profile, 5 Nr

Various flashings

Sliding door 2.5m x 1.5m, handles, and dropbolt

4 nr galvanised rafter, IPE 200, for 30ft lean 2.

am sure I'll trip over some more stuff....

thanks

Paul

 

[whichwire]

A few more pics.

Set of basic entrance gates, 1 galv, the other galv and painted.
300 Amp 3 phase Oerkilon MIG
Small Sliding door
Large sliding door frames (in two pieces)
Flashings and sheeting.

Also have a large A frame gantry that I build a few years ago. Around 18 ft wide, 10 - 12 ft high on large rubber wheels. Its kinda buried under a few things but if theres interest I can drag it out a get a few pics :whistling:

 

[whichwire]

update - thrusses may be gone...deposit cheque in post

gantry sold

everything else on the market! also have a 12ft wooden gate with fine 12'' sq posts, will post pics later.

And there is this, the first MIG I bought new, an EPS inverter MIG. I lent it to a friend and came back not working suspect it the wire feed was dropped and a card damaged.

It was a great machine, single phase, can used for arc welding also. Have long extensions for the seperate wire feed.

best offer secures!

 

[whichwire]

Found a new place to work from, space is gonna be a bit tighter so some more things have to get the road!

Overhead gantry crane, 1500kg with stahl chain hoist, 3 phase, can cover 7 x 13m workshop

Selection of spears, collars and baskets for decorative gates.

Jig bench - 5m long. Can take a variety of profiles to make all sorts of items. We used it for feeding barriers and pen dividers.

No reasonable offer refused and am on the lookout for a 200l compresser so would consider part exchange....

30 kva genie will be up for grabs in new year too.

 

[whichwire]

Roof thrusses gone, lathe gone, inverter mig swapped for tig :-)