johndeere6920s
Well-Known Member
I think the fact that the gearbox can come out in about 3 hours is a big plus and that you can get parts off that crowd in france fendt is a bit trousers down I think
The slotted hole is for ploughing so the arms have lateral travel when down. Not sure why the pto's can be harsh on some, the rear pto on the one here is fine but the front was really bad so put a accumulator in the pipe which cured it, could be to do with the valve not pulsing correctly maybe!!I find them a bit of a faf with the mounted mower maybe I'll get used of them with other implements I don't see the point of the slotted hole wouldn't it be better with holes in different places?
Id be fairly confident on saying there the finest tractor I've ever driven.
When we were looking I really wanted a fendt and a few came up but nothing really excited me.
Truth be told the cvx didn't excite me either.
I talked to alot of lads with them everyone of them told me they wanted another one of them I was chatting to one of the mechanics in kill agri I asked him what's better these or a puma without hesitation he said the cvxs he said the vario is far better in the cvxs no big ripping to get at it if you do have a problem.
Im glad we didn't go for a fendt now.
The traction is something else I've had tractors with good tyres that are worse to grip than her and she had bald tyres!
Good on fuel an animal to go serious comfort.
Theres such a quality feel to them they just feel really well built.
Only thing I see wrong is the pto starts off very hard so I must ask the lads here about fitting an accumulator.
And there's no room for. Your phone in the cab
Activate them using the large yellow button on the multi-controller, press again to lower them, you can then use the dial to lift or lower them.Lads I was able to do it last week and I can't now. How do I set up the lifts to work off the dial
The outside buttons always work regardless of what's on or off in the cab, is it the buttons maybe, do both sides not work?Is it some button or something you need to press before you can operate the outside lift/lower three point hitch buttons? Mine only goes down, so tought it the wires was gone for the lift, but one day the lift worked but only once, never before, never after.. bit of work coupling implements running in and out of cab..
Buttons would be known for going faulty after time. Ours were causing lift to lock and not work at allYes, both up buttons doesn't work, shall try to move right down to left upper and see if it works then.
They seem to be all trouble those cvx's....
Someone must have hit a bad bump while. Holding the joystick!!!View attachment 59071 http://www.jrfirby.co.uk/showpic.php?id=5628&pic=1
Oh dear, you have got it bad.......................
Oh dear, you have got it bad.......................
She's probably value to someone with them hours on itHoly crap, that's me out!!!!
View attachment 59083
http://www.rossfarm.co.uk/new-and-u...premium,-50k,-front-linkage,-only-3750hrs/738
I guess so, thought it might be £40k but not £50. That firm would be well aware that it would be sought after hence the price.She's probably value to someone with them hours on it
I guess so, thought it might be £40k but not £50. That firm would be well aware that it would be sought after hence the price.
Go on, give them a cheeky bid
I thought that was odd that he had it up with 2 different prices only realised now it’s 2 different tractorsThis fella has two of them for sale (and the proper colour too ).
https://www.donedeal.ie/view/20065458
Yes exactly, I don't need any encouragement...............................................Would be nice though!!!!!:wub:Don't tempt him, look what happened him before!!
I thought that was odd that he had it up with 2 different prices only realised now it’s 2 different tractors
One has 7k hours and the other has 12Took me a minute to figure it out. Kill Agri also has a tvt but no pics and described in off farm condition