Steam as in water vapour or is it blow by gases?Same 100.4 good bit of steam coming from breather pipe when gets warmed up.tractor running well easy started am I looking at a engine rebuild in time.using very little oil
Might be as simple as getting the head reconditioned, if that doesn’t solve it then a set of rings and hone the liners at a minimum.Blow by gases I would be thinking
Even so unless there's huge amounts I wouldn't worry.Until it starts dropping oil down the breather there is no panic.
When you have a milk carton cable tied on its time to intervene 😅Even so unless there's huge amounts I wouldn't worry.
Yes put a little pump to pump it back in…When you have a milk carton cable tied on its time to intervene 😅
Usually piped into the air intake manifold to be burnt again.Pipe it into the exhaust, some engines have it piped into the sump.