kverneland es 80
Well-Known Member
no air
@Ugo Schtiglitz was looking for a sprayer boom, without tank or pump, it might work out for both of ye.im looking for a sprayer without the booms thats in usable condition as a tank. not over worried about a pump. 1500lts+ mounted or else larger trailed
im looking for a sprayer without the booms thats in usable condition as a tank. not over worried about a pump. 1500lts+ mounted or else larger trailed
is what forums are all about@Ugo Schtiglitz was looking for a sprayer boom, without tank or pump, it might work out for both of ye.
no air
Would an old 1000 gallon tanker or such like be any good?im looking for a sprayer without the booms thats in usable condition as a tank. not over worried about a pump. 1500lts+ mounted or else larger trailed
im looking for a sprayer without the booms thats in usable condition as a tank. not over worried about a pump. 1500lts+ mounted or else larger trailed
im looking for a sprayer without the booms thats in usable condition as a tank. not over worried about a pump. 1500lts+ mounted or else larger trailed
Bit of a issue crossing the border due to offenses I was alleged to have committed in Enniscorthy many years agoHave you a passport to cross into Wexico? Or is that too far away for you Ozzy?
if it was considered an offense in enniscorthy it must have been pretty serious :cry:Bit of a issue crossing the border due to offenses I was alleged to have committed in Enniscorthy many years ago
@KTM Farmer , here is what I ended up with..Anyone know where I might find a second hand pillar box as per photo below? I need the one with both boxes, top for ESB meter and bottom for my own board. New ones available from a company in Kilkenny but very big bucks.
Its for an outside farm so need a secure box.
View attachment 64530
Nice job @Arthur, I am just at the prep stage, I have made further enquiries since your tip about the IP rating. Apparently the IP 44 is acceptable for residential but not Agri. I am moving a meter from a house which is close to falling down so going to chance the pillar box. Farmyard is 75m away from box so hoping they won't have any issue with it.
As you ca n see I only heàrd about the hockey stick entering on the left when the sparkie arrived so it had to take an angle, doubt the cattle will notice.Nice job @Arthur, I am just at the prep stage, I have made further enquiries since your tip about the IP rating. Apparently the IP 44 is acceptable for residential but not Agri. I am moving a meter from a house which is close to falling down so going to chance the pillar box. Farmyard is 75m away from box so hoping they won't have any issue with it.
They insist on the hockey stick entering the LHS as I can see on yours.
As you ca n see I only heàrd about the hockey stick entering on the left when the sparkie arrived so it had to take an angle, doubt the cattle will notice.
Neighbour is looking for a nice single rotor rake, something to row up 20ft.
Condition more important than brand or age.
Budget around 3k, haven’t seen much on my travels
Neighbour is looking for a nice single rotor rake, something to row up 20ft.
Condition more important than brand or age.
Budget around 3k, haven’t seen much on my travels
45 gallon drums (blue barrels ) someone posted here a good while back looking to get rid of a lot of them .
have a few here are you looking for many45 gallon drums (blue barrels ) someone posted here a good while back looking to get rid of a lot of them .
I’d take 12 anyway.have a few here are you looking for many
Evening all. My first post so apologies if I mess up.... Recently sold our 390t and looking for a replacement now, so I'm calling on ye knowledgeable bunch for good solid recommendations. Looking for 80-90hp, compact size, 2 or 4wd, and would prefer a 40k box, some sort of gear box suiting loader work in a tight yard... Personally I would prefer buy a clean tractor and then fit the loader after, that way I know the steering/axle/ clutch/torque wont be wrecked?
Reading a lot on here I found out the case 844, 856, massey 3075, ford 6640 would be decent machines...
Anyone care to chime in and guide me... and maybe suggest where to find a clean model of the above?